Site-specific dataset of mining and metallurgical residues for resource management.

This geospatial dataset provides a compilation of findings from an evidence-based review of site-specific resource assessments of mining and metallurgical residues. Information pertaining to location, target material, geological knowledge, extractability, resource classification and stakeholder perspectives was collected from publicly available reports, articles, academic theses, and databases. The dataset includes 44 relevant data attributes from 64 mining and metallurgical sites in 27 countries. Resource classification is available for 38 sites. The dataset can be used by evaluators of recovery projects, authorities that provide permits, as well as by decision makers in support of developing regulatory policies. The dataset facilitates future addition of sites by the research community and can be further used as a starting point to bridge the estimates on recoverable quantities to the United Nations Framework Classification (UNFC). The UNFC is a universally applicable scheme for the sustainable management of all energy, primary and secondary mineral resources. Its use is stimulated by the European Commission and is intended to be adopted by geological surveys to harmonize the data on the availability of primary and secondary raw materials in Europe in future.

Life cycle assessment and cost-benefit analysis of nature-based solutions for contaminated land remediation: A mini-review.

Nature-based solutions (NbS) have gained significant attention as a promising approach for remediating contaminated lands, offering multiple ecosystem services (ESs) benefits beyond pollution mitigation. However, the quantitative sustainability assessment of NbS remediation systems, particularly with regard to post-remediation impacts, remains limited. This mini-review aims to address the existing gaps in the assessment of NbS remediation systems by evaluating the limitations of life cycle assessment (LCA) and cost-benefit analysis (CBA) methodologies. A systematic literature search was conducted resulting in the review of 44 relevant studies published between 2006 and 2023. The review highlights an increasing trend in the coverage in the sustainability assessment literature of NbS remediation systems. Phytoextraction was identified as the main NbS mechanism employed in 65 % of the reviewed works, targeting contaminants such as heavy metals and hydrocarbons. However, the post-remediation aspects, including impacts on ESs and the end-of-life management of NbS biomass, were often neglected in the assessments with only a subset of studies partially exploring such aspects. The findings underscore the need for a comprehensive and integrated approach to assess the sustainability of NbS remediation systems, including the incorporation of economic factors, site-specific considerations, and post-remediation impacts. Addressing these gaps will enhance the understanding of NbS effectiveness and facilitate informed decision-making for contaminated land remediation.

Application of enzymatic and bacterial biodelignification systems for enhanced breakdown of model lignocellulosic wastes.

This paper explores the extent to which enzymatic and bacterial biodelignification systems can breakdown lignocellulose in model wastes to potentially enhance biogas generation. Two representative lignocellulosic wastes (newspaper and softwood) commonly found largely undegraded in old landfills were used. A fungal peroxidase (lignin peroxidase) enzyme and a recently isolated lignin-degrading bacterial strain (Agrobacterium sp.) were used. Tests were conducted in stirred bioreactors with methanogens from sewage sludge added to produce biogas from breakdown products. Addition of lignin peroxidase resulted in ~20% enhancement in cumulative methane produced in newspaper reactors. It had a negative effect on wood. Agrobacterium sp. strain enhanced biodegradation of both wood (~20% higher release of soluble organic carbon and enhanced breakdown) and newspaper (~2-fold biogas yield). The findings of this paper have important implications for enhanced breakdown in old landfills that are rich in these wastes, and anaerobic operations utilising lignocellulosic wastes for higher degradation efficiencies and biogas production.

Plant growth, root distribution and non-aqueous phase liquid phytoremediation at the pore-scale.

The success of phytoremediation is dependent on the exposure of plants to contaminants, which is controlled by root distribution, physicochemical characteristics, and contaminant behavior in the soil environment. Whilst phytoremediation has been successful in remediating hydrocarbons and other organic contaminants, there is little understanding of the impact of non-aqueous phase liquids (NAPLs) on plant behavior, root architecture and the resulting impact of this on phytoremediation. Light NAPLs (LNAPLs) may be present in pore spaces in the capillary zone as a continuous or semi-continuous phase, or as unconnected ganglia which act as individual contaminant sources. Experimental work with ryegrass (Lolium perenne) grown under hydroponic conditions in idealised pore scale models is presented, exploring how plant growth, root distribution and development, and oil removal are affected through direct physical contact with a model LNAPL (mineral oil). In the presence of low levels of LNAPL, a significant decrease in root length was observed, whilst at higher LNAPL levels root lengths increased due to root diversion and spreading, with evidence of root redistribution in the case of LNAPL contamination across multiple adjacent pores. Changes to root morphology were also observed in the presence of LNAPL with plant roots coarse and crooked compared to long, fine and smooth roots in uncontaminated columns. Root and shoot biomass also appear to be impacted by the LNAPL although the effects are complex, affected by both root diversion and thickening. Substantial levels of LNAPL removal were observed, with roots close to LNAPL sources able to remove dissolved-phase contamination, and root growth through LNAPL sources suggest that direct uptake/degradation is possible.

Erodibility of synthetic water repellent granular materials: Adapting the ground to weather extremes.

Granular materials with synthetic water repellent coatings have great potential to be used in ground interfaces (ground-atmosphere-vegetation and ground-structure) as infiltration barriers, due to their altered hydrological properties (suppressed infiltration and decreased sorptivity). However, very few studies have evaluated the impact of synthetic soil water repellency on soil erosion. This paper investigates the effect of water repellency on soil erosional behavior, including splash erosion and rill processes. Twenty-four flume tests were carried out on model slopes under artificial rainfall; soils with three wettability levels were tested, including wettable (contact angle, CA < 90°), subcritical water repellent (CA ~ 90°) and water repellent (CA > 90°). Various rainfall intensities (230 mm/h, 170 mm/h, 100 mm/h and 40 mm/h) and grain sizes (Fujian sand and sand/silt mixture) were adopted. Erosional variables, including splash erosion rate, average sediment concentration, peak sediment concentration and time to peak sediment were measured to quantitatively analyze the behavior. This study confirms the impact of water repellency on soil erosion and unveils the possibility to reduce infiltration at ground-atmosphere interface with controlled soil erosion. The results revealed that: (1) synthetic water repellency does not necessarily lead to increased soil erosion yield; its impact is dependent on grain size with the soil erosion loss increasing for Fujian sand, but decreasing for sand/silt mixtures; (2) splash erosion is positively correlated to soil water repellency and high rainfall intensity, regardless of grain size; (3) the erosion processes for sand/silt mixtures are particle size selective and not affected by soil water repellency, whereas this phenomenon is not observed with Fujian sand.

The case for examining fluid flow in municipal solid waste at the pore-scale - A review.

In this paper, we discuss recent efforts from the last 20 years to describe transport in municipal solid waste (MSW). We first discuss emerging themes in the field to draw the reader's attention to a series of significant challenges. We then examine contributions regarding the modelling of leachate flow to study transport via mechanistic and stochastic approaches, at a variety of scales. Since MSW is a multiphase, biogeochemically active porous medium, and with the aim of providing a picture of transport phenomena in a wider context, we then discuss a selection of studies on leachate flow incorporating some of the complex landfill processes (e.g. biodegradation and settlement). It is clear from the literature survey that our understanding of transport phenomena exhibited by landfilled waste is far from complete. Attempts to model transport have largely consisted of applying representative elementary-scale models (the smallest volume which can be considered representative of the entire waste mass). Due to our limited understanding of fluid flow through landfilled waste, and the influence of simultaneously occurring biogeomechanical processes within the waste mass, elementary-scale models have been unable to fully describe the flow behaviour of MSW. Pore-scale modelling and experimental studies have proven to be a promising approach to study fluid flow through complex porous media. Here, we suggest that pore-scale modelling and experimental work may provide valuable insights into transport phenomena exhibited by MSW, which could then be used to revise elementary-scale models for improved representation of field-scale problems.

An indicator-based problem reduction scheme for coupled reactive transport models.

A number of effective models have been developed for simulating chemical transport in porous media; however, when a reactive chemical problem comprises multiple species within a substantial domain for a long period of time, the computational cost can become prohibitively expensive. This issue is addressed here by proposing a new numerical procedure to reduce the number of transport equations to be solved. This new problem reduction scheme (PRS) uses a predictor-corrector approach, which "predicts" the transport of a set of non-indicator species using results from a set of indicator species before "correcting" the non-indicator concentrations using a mass balance error measure. The full chemical transport model is described along with experimental validation. The PRS is then presented together with an investigation, based on a 16-species reaction-advection-diffusion problem, which determines the range of applicability of different orders of the PRS. The results of a further study are presented, in which a set of PRS simulations is compared with those from full model predictions. The application of the scheme to the intermediate-sized problems considered in the present study showed reductions of up to 82% in CPU time, with good levels of accuracy maintained.

Changes in metal speciation and mobility during electrokinetic treatment of industrial wastes: Implications for remediation and resource recovery.

Industrial waste deposits contain substantial quantities of valuable metals and other resources, although often in a recalcitrant form that hinders their recovery. This paper reports an experimental programme on the application of electrokinetic (EK) processing to two different waste materials (a mine tailings deposit and a metallurgical furnace dust), with the aim of exploring the effect of EK on metal speciation and extractability, with a focus on Pb and Zn due to their prevalence in these materials. The speciation of metals within the waste was determined based on a selective sequential extraction (SSE) procedure which was applied to the materials before, during and after the application of the EK treatment. The results demonstrate the generation of an acidic front in the mine tailings, which enhanced the transport of ions associated with the more labile fractions, a behaviour typical of materials characterized by a lower buffering capacity. The application of the EK in the furnace dust showed much less effect due to a very high starting pH (10) with the higher buffering capacity posing an obstacle to transport. It is shown that EK has altered the geochemical speciation of the metals in both materials, typically redistributing them from less available SSE fractions to the more labile fractions. Zn was redistributed with the SSE fractions and mobilised to a greater extent than Pb in both samples. The changes in pH and redox potential arising as a result of the application of an electric field are likely to be the main causes of the changes in speciation of both Zn and Pb. The considerable changes in metal fractionation, including removal from more recalcitrant fractions, suggest that EK may facilitate metal recovery processes. This, combined with its applicability to fine grained materials and heterogeneous environments, demonstrates that the technique may be particularly suited to both remediation of, and in-situ resource recovery from, such materials.

Influences of operational practices on municipal solid waste landfill storage capacity.

The quantitative effects of three operational factors, that is initial compaction, decomposition condition and leachate level, on municipal solid waste (MSW) landfill settlement and storage capacity are investigated in this article via consideration of a hypothetical case. The implemented model for calculating landfill compression displacement is able to consider decreases in compressibility induced by biological decomposition and load dependence of decomposition compression for the MSW. According to the investigation, a significant increase in storage capacity can be achieved by intensive initial compaction, adjustment of decomposition condition and lowering of leachate levels. The quantitative investigation presented aims to encourage landfill operators to improve management to enhance storage capacity. Furthermore, improving initial compaction and creating a preferential decomposition condition can also significantly reduce operational and post-closure settlements, respectively, which helps protect leachate and gas management infrastructure and monitoring equipment in modern landfills.